Entering Values Using Keyboard and Mouse
This section explains the setting operation for the values in each settings dialog box.
Direct Input of Value
You can directly enter values with [0] to [9] on the keyboard.
1) Select the input field and enter the value on the keyboard.
-
You can enter the value in the HHMMSSFF format (H = hour; M = minute; S = second; and F = frame). For example, enter “43S21F” or “4321” in only numerics for 43 seconds and 21 frames. Enter “10M” or “100000” for 10 minutes. If entering “3H2M1S0F”, the value will be “03:02:01:00”.
2) Press [Enter] on the keyboard.
Offset Input
You can enter variation values in the input field.
1) Select the input field and enter the variation value from the current set value.
2) Press [Enter] on the keyboard.
-
Enter “ - ” before the value to decrease the set value.
-
Enter “ + ” before the value to increase the set value.
-
Offset input is only available for entering the timecode.
Setting with Arrow Keys
You can enter values with keys on the keyboard.
1) Select the input field and change the value with arrow keys on the keyboard ( ↑ , ↓ , ← , → ).
2) Press [Enter] on the keyboard.
Entering with Mouse Wheel
The set values can be changed with the mouse wheel. The mouse wheel is in the center of the mouse.
1) Move the mouse cursor near the input field.
-
The shape of the mouse cursor changes.
2) Click the value and rotate the mouse wheel.
Alternative
-
Hold the right button of the mouse in the settings input field, and drag the mouse upward to increase the value. The value continues to increase while the mouse is dragged. The value increases accordingly, when the mouse is moved away from the initial drag position.
-
In the same way, hold the right button of the mouse and drag downward to decrease the value.
-
Hold the left button of the mouse and drag upward to increase the value by the movement of the mouse. In the same way, drag downward to reduce the value. In this case, the value does not change unless you move the mouse.