[VideoFilters]
Besides the following effects, frequently used effects, such as video filter for old movies, are registered as system presets.
[Color Correction]
Includes video filters for color adjustment, such as 3-Way color correction and YUV curve.
Adjusting Color/Brightness (Color Correction)
[Anti Flicker]
Reduces screen flicker. Effective for images with little motion.
[Emboss]
Makes a three-dimensional monotone image like a lithograph. You can set the direction and depth of the shadow.
[Old Movie/Film]
Makes an image look like an old film.
[Chrominance]
Specifies a color as the key color, and apply a specific filter to the inside, edge or outside.
[Sharpness]
Sharpens the outline of objects and makes an image look as if it is a higher resolution.
[Stabilizer]
Correct the camera shake by image processing.
[Strobe/Freeze]
Creates an effect like a strobe light flashing.
[Soft Focus]
Applies an effect like a mist that softens the video.
[Select channel]
Switches the output of a clip with alpha channel to key output or fill output.
[Tunnel Vision]
Makes an image look like it is in a tunnel. It is effective when used in combination with [Loop Slide].
[Video Noise]
Adds noise.
[Blur]
Makes an image look blurred.
[Blend Filters]
Blends two video filters in any respective proportion. The blend ratio can be set to change along the time axis by setting a key frame.
[Mask]
Applies a video filter to the inside or outside of a given range. Using the pass, the application range can be rectangular, elliptical, or any shape.
You can also use motion tracking. It automatically tracks specific parts of a subject in motion and apply an effect.
[Matrix]
Applies a preferred set matrix to every pixel, to blur or sharpen an image. It is effective when exporting images in MPEG format that have a lot of movement.
[Mirror]
Reverses an image.
[Median]
Balances an image to be smooth to decrease the noise component. Increasing the threshold value gives a paintbrush effect.
[Mosaic]
Applies a mosaic to an image. It is effective when used on parts of an image in combination with [Mask].
[Motion Blur]
Applies the [Blur] effect to moving objects only. This effect can be applied when the whole image moves on the screen such as during a pan or tilt movement.
[Raster Wipe]
Transforms an image to become wavelike.
[Loop Slide]
Slides an image as if it is connected above, below, left or right.
[Block Color]
Displays an image in monochrome. It is effective when used on parts of an image in combination with [Mask].
[Pencil Sketch]
Makes an image look like its outline was traced with a pencil.
[Smooth Blur]
Applies an effect where the focal point seems blurred while suppressing discoloration.
[Combine Filters]
Sets up to 5 filters simultaneously. You can also set multiple filters without using [Combine Filters], though the synergistic effect of multiple filters may not appear if you do not use [Combine Filters].(For example, when applying multiple filters in an area specified using a [Mask] or [Chrominance] filter.)
[Gaussian Blur]
Applies a defocusing effect in higher quality than [Blur] and [Smooth Blur].
[Transform]
Sets cropping, zoom-in/out, movement, rotation, etc. of the image.